Settings
144
AD-P 30/35/4001 SPECIAL BAH0095-2 11.17
8.7.3
Moving the exact following harrow to the working/transport position
8.7.3.1
Move the exact following harrow into working position
The roller and the coulters force the soil out-
wards to different extents depending on the for-
ward speed and condition of the soil. Set the
outer harrow such that the soil is guided back
and a trackless seed bed is created. The greater
the forward speed, the further the square tubes
(Fig. 170/1) have to be pushed outwards.
Clamp the square tubes with the outer harrows
after every adjustment. The central key (Fig.
170/2) is used to tighten the bolts.
Fig. 170
8.7.3.2
Moving the exact following harrow into transport position
The outer tines of the exact following harrow can exceed the permissible transport width during
transport (see section "Legal regulations and safety", page 162) and protrude into the traffic area. To
avoid exceeding the permissible transport width, insert both square tubes (Fig. 170/1) with the outer
harrows into the harrow carrier tube up to the stop.
Clamp the square tubes with the outer harrows after every adjustment. The central key (Fig. 170/2) is
used to tighten the bolts.
