General safety instructions
20
AD-P 30/35/4001 SPECIAL BAH0095-2 11.17
2.13
Warning symbols and other labels on the implement
Always keep all the warning symbols of the implement clean and in a
legible state! Replace illegible warning symbols. You can obtain the
warning symbols from your dealer using the order number (e.g.
MD075).
Warning symbols - Layout
Warning symbols indicate danger areas on the implement and warn
against residual dangers. At these points, there are permanent or
unexpected dangers.
A warning symbol consists of two fields:
Field 1
is a symbol describing the danger, surrounded by triangular safety
symbol.
Field 2
is a symbol showing how to avoid the danger.
Warning symbol - Explanation
The
Order number and explanation
column provides an explanation
of the adjacent warning symbol. The description of the warning sym-
bols is always the same and specifies, in the following order:
A description of the risk.
For example: risk of cutting
The consequence of non-compliance with the risk prevention
instructions.
For example: causes serious injuries to fingers or hands.
The risk prevention instructions.
For example: only touch implement parts when they have come
to a complete standstill.
