Start-up
AD-P 30/35/4001 SPECIAL BAH0095-2 11.17
97
6.1.1.7 Table
Actual value according to
calculation
Permissible value ac-
cording to the tractor
operating manual
Double the permis-
sible tyre load-
bearing capacity (2
tyres)
Minimum ballast weight
front/rear
/ kg
--
--
Total weight
kg
kg
--
Front axle load
kg
kg
kg
Rear axle load
kg
kg
kg
You can find the permissible values for the total tractor weight,
axle loads and tyre load-bearing capacity in the tractor registra-
tion papers.
The actually calculated values must be less than or equal to
(
) the permissible values!
WARNING
Risk of contusions, cutting, catching, drawing in and impact
through insufficient stability and insufficient tractor steering
and brake power.
It is forbidden to couple the implement to the tractor used as the
basis for calculation, if
one of the actual, calculated values is greater than the ap-
proved value.
there is no front weight (if necessary) attached to the tractor for
the required minimum front ballast (G
V min
).
ballast your tractor with weights at the front or rear if the tractor
axle load is exceeded on only one axle.
Special
cases:
If the weight of the front-mounted implement (G
V
) is not suf-
ficient to reach the required minimum ballast at the front
(G
V min
), you must use additional weights together with the
front-mounted implement!
If the weight of the rear-mounted implement (G
H
) is not suf-
ficient to reach the required minimum ballast at the rear
(G
H min
), you must use additional weights together with the
rear-mounted implement!
