Allot NetEnforcer AC-1000 Series, Hardware Manual

Page: 75 / 97

Chapter 4: Redundancy
NetEnforcer AC-1000 Hardware Guide 4-11
Figure 4-5 – NIC Tab AC-1040 – NetXplorer Configuration
5.
Set INTERNAL2, EXTERNAL2, INTERNAL4 and EXTERNAL4 to
No
Action
in the Action on Failure field.
6.
Open the
Networking
tab and set the Redundancy Mode as required, to
Parallel, Serial
or
Active
.
7.
Select the
Enable Bypass Unit
checkbox.