Allot NetEnforcer AC-1000 Series, Hardware Manual

Page: 63 / 97

Chapter 3: Setting Up the NetEnforcer
NetEnforcer AC-1000 Hardware Guide 3-17
4.
Use the arrow buttons to select whether to reboot NetEnforcer and press
the
Enter
button. NetEnforcer reboots and the display area indicates the
following:
System
Rebooting *
(blinking asterisk)
NOTE This message also appears in the display area when the NetEnforcer is
rebooted using a terminal.
To shutdown the NetEnforcer:
1.
With the display area displaying the default view, press the
Select
button. The Main menu is displayed.
2.
Press the down arrow five times to display the following:
Main menu:
6. Shutdown
3.
Press the
Select
button. The display area indicates the following:
Shutdown?
[Y]es/[N]o
4.
Use the arrow buttons to select whether to reboot NetEnforcer and press
the
Enter
button. NetEnforcer reboots and the display area indicates the
following:
System
Shutting down *
(blinking asterisk)
After a few seconds, the display area indicates that NetEnforcer may be powered off.
NOTE This message also appears in the display area when the NetEnforcer is
shutdown using a terminal.