Allot NetEnforcer AC-1000 Series, Hardware Manual

Page: 30 / 97

Chapter 1: AC-1000 Series Hardware
NetEnforcer AC-1000 Hardware Guide
1-20
The Single Copper Bypass Unit includes RJ-45 connectors for Ethernet cables and two
D-type 9-pin connectors for primary and redundant unit to backup connection.
The following procedure describes how to connect a Single Copper Bypass Unit to
NetEnforcer.
Figure 1-9 – Connecting the NetEnforcer AC-802 Copper to the Single Copper
Bypass Unit
To connect the Single Copper Bypass to the NetEnforcer:
NOTE For important information regarding cable and connector types, see
Cabling on page 1-14.
1.
Connect the External cable from the External port on the Bypass Unit
to the External port on NetEnforcer.
2.
Connect the Internal cable from the Internal port on the Bypass Unit, to
the Internal port on NetEnforcer.
To External
Router To Internal
Switch