Allot NetEnforcer AC-1000 Series, Hardware Manual

Page: 54 / 97

Chapter 3: Setting Up the NetEnforcer
NetEnforcer AC-1000 Hardware Guide
3-8
•
The duplex type for the External interface. Enter
full
for full duplex,
half
for
half duplex or
auto
for AutoSensing.
•
If you selected full or half duplex, enter the link speed of the External interface,
10M
or
100M
. Use
M
for Mbps.
5.
Enter the following parameters to set up the Management Port:
•
The duplex type for the Internal interface. Enter full for full duplex, half for half
duplex or auto for AutoSensing.
•
If you selected full or half duplex, enter the link speed of the Internal interface,
10M or 100M. Use M for Mbps.
•
The duplex type for the External interface. Enter full for full duplex, half for
half duplex or auto for AutoSensing.
•
If you selected full or half duplex, enter the link speed of the External interface,
10M or 100M. Use M for Mbps.
NOTE If the NetEnforcer unit is being managed via NetXplorer, only the
Management Port can be configured on the Ethernet Adapter Settings
screen.
6.
Press
<Enter>
to finish and return to the Network Configuration menu.
7.
To save your configuration, enter
3
(Save latest settings as current
configuration) from the Network Configuration menu. A message is
displayed, asking whether you wish to make your changes effective
immediately. Enter
y
or
n
.