Allot NetEnforcer AC-1000 Series, Hardware Manual

Page: 70 / 97

Chapter 4: Redundancy
NetEnforcer AC-1000 Hardware Guide
4-6
To toggle redundancy:
go config network –bypass_unit
•
Options are:
o
enable
o disable
For example:
go config network –bypass_unit enable
Configuring the AC-1020 via NetXplorer
1.
Log into NetXplorer
2.
Right click the NetEnforcer you wish to configure in the Navigation
Pane
3.
Select
Configuration
from the drop down menu.
4.
Open the
NIC
tab and in the Action on Failure field, set
INTERNAL1 and EXTERNAL1 to
fail paired port
.