Allot NetEnforcer AC-1000 Series, Hardware Manual

Page: 45 / 97

NetEnforcer AC-1000 Hardware Guide
2-1
Chapter 2: Placement in the Network
The NetEnforcer is normally placed on the internal side of your access router. The
Internal port of the NetEnforcer interfaces with your Local Area Network (LAN) and
the External port of the NetEnforcer interfaces with your access router.
To connect NetEnforcer to your network:
1.
Connect the Bypass Unit to NetEnforcer, as described in Bypass Units ,
page 1-8.
2.
Connect the LAN side of your network to the Internal connector of each link on the
front panel of the Bypass Unit.
3.
Connect the cable connected to the WAN side of your network to the External
connector of each link on the front panel of the Bypass Unit.
NOTE For important information regarding cable and connector types, see
Cabling on p. 1-8.
4.
Power up NetEnforcer. Refer to Powering Up , page 1-30.