Allot NetEnforcer AC-1000 Series, Hardware Manual

Page: 59 / 97

Chapter 3: Setting Up the NetEnforcer
NetEnforcer AC-1000 Hardware Guide 3-13
NOTE If QoS functionality is not included in your NetEnforcer (not enabled by
your activation key), the default view indicates the following:
Inbound:-
Outbound:-.
Configuring NIC Settings
Configuring NIC settings enables you to configure the internal and external Ethernet
adapters to either automatically sense the direction and speed of network traffic, or use a
predetermined duplex type and speed.
NOTE If the NetEnforcer unit is being managed via NetXplorer, only the
Management Port can be configured via the LCD.
To configure NIC settings:
1.
With the display area displaying the default view, press the
Select
button. The main
menu is displayed as follows:
Main menu:
1. NIC Settings
2.
Press the
Select
button. If the Management port is enabled, the display area
indicates the following:
1-1.[M]anagement
[In]/[Ex]ternal
NOTE If the Management port is disabled, the display area indicates the
following:
1-1.Interface
[In]/[Ex]ternal.
3.
Use the arrow buttons to select the required interface and press the
Enter
button.
The display area indicates the following:
Mode: [A]uto or
[F]ull/[H]alf du
4.
Use the arrow buttons to select the duplex type for the selected interface and press
the
Enter
button. The display area indicates the following:
Speed: [A]uto or