Allot NetEnforcer AC-1000 Series, Hardware Manual

Page: 20 / 97

Chapter 1: AC-1000 Series Hardware
NetEnforcer AC-1000 Hardware Guide
1-10
Each power supply has two LEDs located beneath the power supply handles.
Model Copper/Fiber options Power inlet options
AC 1010 Transceiver SFP Copper
Transceiver SFP SX
Transceiver SFP LX 5
Transceiver SFP LX 20
Transceiver SFP ZX
AC/DC
AC 1020 Transceiver SFP Copper
Transceiver SFP SX
Transceiver SFP LX 5
Transceiver SFP LX 20
Transceiver SFP ZX
AC/DC
AC 1040 Copper AC/DC
CAUTION The power entry modules (AC supply option) include two fuses (T2A
250 V, 5 x 20 mm) at each power entry. One is a spare fuse for
replacement purposes. You can open the fuse box and change when
necessary. For continued protection against risk of fire, replace only
with same type and rating of fuse.
Disconnect the product from the power line before removing the
cover. Any adjustment and maintenance of the opened device
should be done only while the device is disconnected from its
source of power and should only be performed by qualified
personnel