Allot NetEnforcer AC-1000 Series, Hardware Manual

Page: 62 / 97

Chapter 3: Setting Up the NetEnforcer
NetEnforcer AC-1000 Hardware Guide
3-16
Activating Bypass
To send the NetEnforcer into Bypass:
1.
With the display area displaying the default view, press the
Select
button. The Main menu is displayed.
2.
Press the down arrow three times to display the following:
Main menu:
4. Bypass
3.
Press the
Select
button. If the system is not in Bypass mode, the display
area indicates the following:
Go into Bypass?
[Y]es/[N]o
4.
Use the arrow buttons to select whether to enter Bypass mode and press
the
Enter
button. NetEnforcer switches to Bypass mode and after a few
moments, the display area displays its default view, the current
bandwidth consumption.
Rebooting, Shutting Down and Exiting the NetEnforcer
You can reboot or shut down the NetEnforcer and exit from LCD configuration as
required.
To reboot the NetEnforcer:
1.
With the display area displaying the default view, press the
Select
button. The Main menu is displayed.
2.
Press the down arrow four times to display the following:
Main menu:
5. Reboot
3.
Press the
Select
button. The display area indicates the following:
Reboot?
[Y]es/[N]o