Allot NetEnforcer AC-1000 Series, Hardware Manual

Page: 22 / 97

Chapter 1: AC-1000 Series Hardware
NetEnforcer AC-1000 Hardware Guide
1-12
•
Provides an infrastructure for improvement of the redundancy capabilities.
NOTE The Management port has its own MAC and IP address.
Management Port Status Indicators
Management Port Status Indicators – AC-1010/1020
The modes of operation of the Management port LEDs are described in the table below.
Mgmnt LED NetEnforcer Status
Green A lit green LED indicates that a link is detected.
Amber A blinking amber LED indicates that traffic is detected on
the interface.
Off An unlit LED indicates that neither links nor activities were
detected.
Table 1-4 –Management LED Conditions – AC-1010/1020
Management Port Status Indicators – AC-1040
Mgmnt LED NetEnforcer Status
Green A lit green LED indicates that a link is detected.
Red A blinking red LED indicates that traffic is detected on the
interface.
Off An unlit LED indicates that neither links nor activities were
detected.
Table 1-5 –Management LED Conditions – AC-1040
Console Port
The Console Port allows the connection of a PC to the NetEnforcer in order to monitor
or configure the unit via the Command Line Interface (CLI)