Allied Telesis AT-SBx81CFC960, Installation Manual

Page: 90 / 324

Chapter 5: Installing the Chassis in an Equipment Rack
90 Section II: Installing the Chassis
Required Tools and Material
Here is a list of the tools and screws for mounting the chassis in an
equipment rack:
 #2 Phillips-head screwdriver
 Eight equipment rack screws
 #2 Phillips-head 10 inch-lbs torque screwdriver (optional)
Here is a list of the tools and wire for installing the grounding wire on the
chassis:

#2 Phillips-head screwdriver

Crimping tool

10 AWG stranded grounding wire

#2 Phillips-head 20 inch-lbs torque screwdriver (optional)
Warning
The chassis may be heavy and awkward to lift. Allied Telesis
recommends that you get assistance when mounting the chassis in
an equipment rack.

E30