Allied Telesis AT-SBx81CFC960, Installation Manual

Page: 83 / 324

SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
Section II: Installing the Chassis 83
Note
Pluggable Equipment. The socket outlet shall be installed near the
equipment and shall be easily accessible.

E5
Caution
Air vents must not be blocked and must have free access to the
room ambient air for cooling.

E6
Warning
Operating Temperature. This product is designed for a maximum
ambient temperature of 40° degrees C.

E7
Note
All Countries: Install product in accordance with local and National
Electrical Codes.

E8
Warning
When installing this equipment, always ensure that the frame ground
connection is installed first and disconnected last.

E11
Caution
Circuit Overloading: Consideration should be given to the
connection of the equipment to the supply circuit and the effect that
overloading of circuits might have on over current protection and
supply wiring. Appropriate consideration of equipment nameplate
ratings should be used when addressing this concern.

E21
Caution
Risk of explosion if battery is replaced by an incorrect type. Replace
only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the
manufacturer’s instructions.
Attention: Le remplacement de la batterie par une batterie de type
incorrect peut provoquer un danger d’explosion. La remplacer
uniquement par une batterie du même type ou de type équivalent
recommandée par le constructeur. Les batteries doivent être
éliminées conformément aux instructions du constructeur.

E22