Allen-Bradley SLC 500 DeviceNet, User Manual, Page: 88 / 139

Publication 1747-6.5.5 - August 2000
6-2 Creating and Running the Example Application Program
Installing the Software
Perform the following steps to install the software.
1. Insert the software CD-ROM installation disk in the drive.
The CD-ROM supports Windows Autorun. If you have Autorun
configured, the installation will automatically start when you insert
the CD-ROM in your drive. If you do not have Autorun configured,
perform steps 2 and 3.
2. From the Windows Start menu, select Run .
3. Browse for the Setup program on the CD ROM and open it .
4. Follow the prompts that appear on the screen as you install the
software.
Creating the Example
Application Program
Perform the following steps to create the example application
program.
1. Start the RSLogix 500 programming software. You will see the
following screen.
2. From the File menu select New .