Allen-Bradley SLC 500 DeviceNet, User Manual, Page: 129 / 139

1 Publication 1747-6.5.5 - August 2000
Appendix
H
Installing and Configuring the ControlNet
Communications Driver
The examples using ControlNet in this manual were performed with a
1784-KTCX15 communication interface card installed in the personal
computer that was used as a programming terminal. This appendix
describes how to install and configure the 1784-KTCX15 card.
Installing the 1784-KTCX15
Communication Interface
Card Perform the following steps to install the 1784-KTCX15 card in your
personal computer.
1. Set the card’s base memory address location on switches S1 and
S2.
2. Set the card’s base I/O space address location on switch S3.
For detailed
information on
installing the
1784-KTCX15, refer to
the ControlNet
Communication
Interface Card
Installation Instructions,
More
D000:0000
Front of Switches
Factory-set address
(recommended setting)
up (1)
S2 S1
down (0)
Front View
Side View
down (0)
up (1)