Allen-Bradley SLC 500 DeviceNet, User Manual, Page: 39 / 139

Publication 1747-6.5.5 - August 2000
Hardware Setup 3-3
Establishing Data Highway Plus Communications
For the examples using Data Highway Plus (DH+) in chapters 5 and 6
of this manual we installed a 1784-KTX communications card in the
host platform (see Appendix G) and a SLC 5/04 processor with the
default Channel 1 DH+ configurations listed below:
•
DH+ Node Address = 1
•
Baud Rate = 57.6K
Connect Channel 1 of the SLC 5/04 processor to the DH+ network
using the 3-pin connector on the front of the module.
See Chapter 5 and Appendix D for information on configuring the
SLC 5/04 processor’s DH+ communications.
Installing an Ethernet SLC 500 Processor (SLC 5/05)
In order to communicate with your SLC 500 processor over an
Ethernet network, you must install an Ethernet version of the
processor (SLC 5/05, catalog numbers 1747-L551, 1747-L552, or
1747-L553).
Terminating
Resistor
More