Allen-Bradley SLC 500 DeviceNet, User Manual, Page: 7 / 139

Publication 1747-6.5.5 - August 2000
About This User Manual P-3
The Example Application
This manual describes how to set up an example application. The
manual provides examples of each step of the setup, with references
to other manuals for more details.
System Components
We used the following devices and software for the example
application. For your own application, substitute your own devices to
fit your needs. The recommended configurations in this user manual
will help you set up the test system and get it working. Your eventual
configuration will depend on your application.
Note: If you use different software or fimware versions of these
products some of your screens may appear slightly different from
those shown in the example.
Product Name Catalog Number Series/Revision
Qty Hardware
1 SLC 500 Modular Chassis 1746-A4, -A7, -A10, -A13 B
1 SLC 500 Power Supply 1746-P1, -P2, -P3, -P4, -P5, -P6 -
1 SLC 5/04 Processor 1747-L541, -L542, -L543 -
1 SLC 5/05 Processor (Ethernet) 1747-L551, -L552, -L553 -
1 DeviceNet Scanner module 1747-SDN/B B
1 ControlNet RS-232 Interface module 1747-KFC15 -
1 DeviceNet Quad-Tap 1492-DN3TW -
1 RediSTATION operator interface module 2705-TxDN1x42x-xxxx -
1 Series 9000 Photoeye 42GNU-9000 or equivalent -
1 DeviceNet RS-232 Interface module 1770-KFD -
1 RS-232 cables 1787-RSCABL/A (PC to 1770-KFD) -
DeviceNet dropline or trunk cables, as
needed 1787-PCABL, -TCABL, -MCABL -
1 24V Power Supply any regulated 24VDC, 8A -
1 PC IBM-compatible
Windows 95/98 or
NT 4.0 with Service Pack 4 -
Software
RSLogix 500 9324-RL0300xxx Rev 4.00
RSNetWorx for DeviceNet 9357-DNETL3 Rev 2.22
RSLinx 9355-WAB Rev 2.10