ALICE 3639.3763.02 User Manual Download Page 103

Page: 103 / 214

Instrument functions

R&S

NGU

103

User Manual 1179.2531.02 ─ 03

2. Select the required field to configure.

The R&S

NGU reset the instrument date and time accordingly.

6.20.5

Device information

General instrument information of R&S

NGU.

► Select the "Instrument Information" to display the device information.

The R&S

NGU displays the device information dialog.

Figure 6-79: Device information dialog

Device information

Description

Model

Model of the instrument.

Instrument orderable part number.

Serial No.

Unique identification number for the instrument.

Version

Software version that is installed in the instrument.

Hardware IDs

Unique serial number of the front and mainboard of
the instrument.

Temperatures

Temperature in degrees measured in Ch1

If the temperature exceeded the specification, "Over
Temperature Protection" (OTP) is triggered and the
respective output channel is turned off.

Misc

Temperature measures for CPU.

Fan speed and memory capacity in the instrument.

6.20.6

Update device

General instrument settings

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for 3639.3763.02























































































































































































































Search results

Summary of Contents for 3639.3763.02

Reviews:

Related manuals for 3639.3763.02

Brands by name

Popular brands

ALICE 3639.3763.02, User Manual

Search results

Summary of Contents for 3639.3763.02

Reviews:

Related manuals for 3639.3763.02

Brands by name

Popular brands