ALICE 3639.3763.02 User Manual Download Page 104

Page: 104 / 214

Instrument functions

R&S

NGU

104

User Manual 1179.2531.02 ─ 03

Latest instrument firmware is available in the R&S

NGU product homepage.

1. Select the "Update Device" to update instrument firmware.

The R&S

NGU displays the update device dialog.

Figure 6-80: Update device dialog

2. Select the source and file location to update instrument firmware.

3. Select "UPDATE" to update the instrument firmware.

The R&S

NGU updates the instrument firmware accordingly.

6.21

Device documentation

You can retrieve the R&S

NGU Open Source Acknowledgment documentation from the

instrument documentation folder

/int/documentation

1. Go to "File Manager" menu.

The R&S

NGU displays the file manager dialog.

For more information, see

Chapter 6.17, "File manager"

on page 86.

2. Select the documentation folder in the file manager dialog.

The R&S

NGU displays the available files in the documentation folder.

3. Select the file you want to copy from the documentation folder.

Device documentation

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for 3639.3763.02























































































































































































































Search results

Summary of Contents for 3639.3763.02

Reviews:

Related manuals for 3639.3763.02

Brands by name

Popular brands

ALICE 3639.3763.02, User Manual

Search results

Summary of Contents for 3639.3763.02

Reviews:

Related manuals for 3639.3763.02

Brands by name

Popular brands