Operating basics
R&S
®
NGU
32
User Manual 1179.2531.02 ─ 03
("Min", "Avg", "Max") for power, voltage and current with calculation on energy mea-
surement and number of samples used for the measurements.
To reset the statistic data, select the button displaying the number of samples. The sta-
tistics provides valid data for up to 365 days of continuous operation.
1
2
3
4
5
6
7
8
9
10
11
Figure 5-2: Channel display area for R&S
NGU
1
= Measurement range setting for voltage and current
2
= Source output resistance/emulated internal impedance displays in ohms (available only with R&S
NGU201 model)
3
= Output power displays in watt
4
= Measurement of DVM value (available only as an option R&S-NGU-K104 with R&S NGU201 model)
5
= "Settings" button opens instrument device/channel menu window. Long-press on the button opens the
6
= Minimum, average and maximum value for power, voltage and current measurements with energy cal-
culation and number of samples used for measurement
7
= Output current displays in ampere with display resolution of six
½
decimal points
8, 9 = Set current level for sink and source mode with level limits defined in
10 = Set voltage level with level limit defined in
11 = Output voltage displays in volt with display resolution of five decimal points (negative value available
only with R&S NGU401 model)
Operating mode
Different font colors on the screen are used to differentiate the various output status
and operating conditions of the instrument. It is easy to know and confirm the different
output status and operating conditions of the instrument by looking at the colors.
Display overview
www.allice.de
Allice Messtechnik GmbH
