ALICE 3639.3763.02 User Manual Download Page 37

Page: 37 / 214

Operating basics

R&S

NGU

User Manual 1179.2531.02 ─ 03

1. Press [Home] key.

The R&S

NGU displays the home window.

2. Select the "Settings" button on the required channel display area.

Alternatively, press [Settings] key.

3. Select the "Device" tab to access the device menu.

Figure 5-8: Device menu

Menu

Description

"Graphical View"

Graphical display of available data source (e.g. voltage, cur-
rent, etc.)

"Arb Editor"

Programs the waveform of voltage and current settings for the
channel output.

"Battery Model Editor"

Available only as an option R&S NGU-K106 with R&S
NGU201 model.

Edit new or existing battery model data.

"Logging"

Data logging on the instrument timestamp, voltage, current
and power.

"Trigger"

Activates the trigger source for SCPI command (*TRG).

"Digital Output"

Available only with option R&S NGU-K103.

"File Manager"

File transfer function between instrument internal memory and
USB stick.

"Interfaces"

IEEE-488 (GPIB) interface is available only with option R&S
NGU-B105.

Configures the network (LAN, Wireless LAN), USB interface
and GPIB address

"User Button"

Configures the shortcut key action (e.g. screenshot, trigger,
toggle logging, reset statistics, toggle touch).

"Screenshot"

Captures screen image of the instrument.

"CSV Settings"

Configures the file formatting for CSV file.

Front panel keys

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for 3639.3763.02























































































































































































































Search results

Summary of Contents for 3639.3763.02

Reviews:

Related manuals for 3639.3763.02

Brands by name

Popular brands

ALICE 3639.3763.02, User Manual

Search results

Summary of Contents for 3639.3763.02

Reviews:

Related manuals for 3639.3763.02

Brands by name

Popular brands