Remote control commands
R&S
®
NGU
166
User Manual 1179.2531.02 ─ 03
ARBitrary:PRIority:MODE
<arg0>
Sets or queries the arbitrary priority mode.
Parameters:
<arg0>
CPM | VPM
CPM
Current priority mode.
VPM
Voltage priority mode.
*RST:
VPM
Example:
ARB:PRI:MODE VPM
Set priority mode to VPM.
ARBitrary:REPetitions
<repetition_rate>
ARBitrary:REPetitions?
Sets or queries the repetition rate of the defined arbitrary waveform for the previous
selected channel. Up to 65535 repetitions are possible. If the repetition rate „0“ is
selected the arbitrary waveform of the previous selected channel is repeated infinitely.
Parameters:
repetition_rate
Range:
0 to 65535
The "0" indicates infinite repetition.
Example:
ARB:REP 10
ARB:REP?
-> 10
The returned repetition rate of the Ch1 arbitrary waveform is 10.
ARBitrary:RESTore
Loads an arbitrary table from a file (filename specified with
ARB:FNAM
)
Example:
ARB:DATA 10,1,0.5,0
ARB:REP 10
ARB:FNAM "ARB03.CSV“,INT
ARB:SAVE
ARB:REST
Restores an arbitrary data from filename
ARB03.CSV
.
Usage:
Event
ARBitrary:SAVE
Saves the current arbitrary table to a file (filename specified with
ARB:FNAM
).
Advanced operating commands
www.allice.de
Allice Messtechnik GmbH