manualshive.com logo in svg

AJA FS3, Installation And Operation Manual, Page: 89 / 108

Share
Download
AJA FS3 Installation And Operation Manual Download Page 89

FS3 Frame Synchronizer/Converter v1.1r1 89 www.aja.com

 

Appendix A – Specifications

FS3 Tech Specs

Video Input Digital

•  Four 3G-SDI inputs, 2 BNC and up to 2 fiber (optional)
•  4x1 selector feeds video processor
•  3G-SDI/HD/SD, SMPTE-259/292/424, 8 or 10-bits

•  3G-SDI Level A, Level B-DL, or Level B-DS
•  Dual Link HD-SDI (2x1.5G), SMPTE -372
•  Single Link 3G-SDI/HD/SD

•  Fiber SDI, SMPTE-297, 8 or 10-bits (optional)

•  Dual Channel LC connector modules
•  Single Channel LC connector modules
•  Single Channel SC connector modules

•  Formats and frame rates

•  (2K) 2048 x 1080p 23.98, 24, 25, 29.97, 50, 59.94
•  (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 50, 59.94
•  (HD) 1920 x 1080PsF 23.98, 24, 25, 29.97, 50, 59.94
•  (HD) 1920 x 1080i 50, 59.94
•  (HD) 1280 x 720p 50, 59.94
•  (SD) 625i 50
•  (SD) 525i 59.94
•  YCbCr, 4:2:2, 10-bit

Video Output Digital

•  Twelve 3G-SDI outputs, 8 BNC and up to 4 fiber (optional)
•  Video processor feeds all outputs
•  3G-SDI/HD/SD, SMPTE-259/292/424, 8 or 10-bits

•  Quadrant (Square Division) or 2SI (Two Sample Interleave) 4K/UltraHD pixel 

mapping

•  3G-SDI Level A, Level B-DL, or Level B-DS
•  Quad 3G-SDI for 4K/UltraHD p50/59.94 (3 copies on Quad SDI)
•  Dual 3G-SDI for 4K/UltraHD p23.98/24/25/29.97 (6 copies on Dual SDI)
•  Single Link SD/HD/3G-SDI (12 copies on single SDI)

•  Fiber SDI, SMPTE-297, 8 or 10-bits (optional)

•  Dual Channel LC connector modules
•  Single Channel LC connector modules
•  Single Channel SC connector modules

Summary of Contents for FS3













































































































Reviews:

No comments