FS3 Frame Synchronizer/Converter v1.1r1 23 www.aja.com
IP or DHCP). Your IT department will be able to supply the information you need
to install the FS3 on a LAN.
The following illustration shows a network connection example; your installation
may differ.
Figure 7. Network Example, Two FS3s on a LAN, with Laptop
10/100/1000 Base-T
10/100/1000 Base-T
Laptop
w/Web Browser
for Remote Control
Firewall
& Router
WAN/ISP
Hub or Switch
10/100/1000 Base-T
LAN
FS3 Default Network Settings
The FS3 ships from the factory set for DHCP networking, and can be manually
reset to the following default network settings:
IP Address
192.168.0.2
Subnet Mask
255.255.255.0
Gateway
192.168.0.1
Networking Using DHCP or Default Static IP
The FS3 factory default configuration automatically looks for a DHCP server to
issue an IP address. If your network includes a DHCP server, plug the FS3 into the
network and connect with the unit as follows:
1. Press the CONFIG button.
2. Turn the SELECT knob to navigate to config parameter 2.2. Note on a piece
of paper the DHCP supplied IP address shown.
3. With your laptop or desktop computer connected to the same LAN as the
FS3 and DHCP enabled, type the IP address you noted into the browser
address field and press Enter. You should now see the FS3’s browser Status
screen.