manualshive.com logo in svg

AJA FS3, Installation And Operation Manual, Page: 34 / 108

Share
Download
AJA FS3 Installation And Operation Manual Download Page 34

FS3 Frame Synchronizer/Converter v1.1r1 34 www.aja.com

 

Press STATUS button and

turn SELECT knob to scroll

through Status pages. 

Settings cannot be changed.

   SELECT

ADJUST

IN1           SDI1                       1080i59

BKGD      Black 

GEN         Ref                          1080i59

OUT                                            UHD59

Current Settings

Current Settings

Current Settings

Current Settings

Simple Menus: Config Format Alarm Filters

These steps explain how to navigate to and change simple menus, such as the 

Power Supply Alarm Filters.
1.  Press the CONFIG Menu Group button.
2.  Turn the SELECT knob to access menu Power Supply Alarm. The default 

alarm setting is Normal.

Turn the SELECT knob to 

scroll through parameter 

menus. 

SELECT

ADJUST

5        Power Supply Alarm

Normal

Press the

CONFIG button

PS Alarm Menu

Current Setting

Labels (none)

Turn the ADJUST

knob to change

settings.

 CONFIG

3.  Turn the ADJUST knob one click clockwise to change the setting to 

Suppress, which turns off the alarm so that it will never come on.

4.  Turn the SELECT knob clockwise again to access menu Video Format Alarm. 
5.  Now change the Video Format Alarm setting, using the ADJUST knob.
6.  Continue by turning SELECT to access the Reference Alarm setting. Change 

the settings using the ADJUST knob, if you wish.

Hidden Parameter Menus: Video ProcAmp

These steps explain how to navigatenavigate to  and change hidden parameter 

menus, such as the Video ProcAmp settings. When the CONFIG menus Hidden 

Menus parameter is set to Hide Interactive, some function submenus are hidden 

when that function is not active. 
1.  Press the VIDEO PROC Menu Group button. 
2.  Turn the SELECT knob as necessary to display menu ProcAmp.
3.  Turn the ADJUST knob to change the value setting from OFF (default) to ON. 

Summary of Contents for FS3













































































































Reviews:

No comments