FS3 Frame Synchronizer/Converter v1.1r1 56 www.aja.com
15.2 ROI Right
This parameter sets the right boundary of the ROI.
Variable
(default=100%)
Sets ROI right boundary to 10-100% of full screen in 0.1% increments.
For 1% increments, hold down the Video button.
15.3 ROI Top
This parameter sets the top boundary of the ROI.
Variable
(default=100%)
Sets ROI top boundary to 10-100% of full screen in 0.1% increments. For
1% increments, hold down the Video button.
15.4 ROI Bottom
This parameter sets the bottom boundary of the ROI.
Variable
(default=100%)
Sets ROI bottom boundary to 10-100% of full screen in 0.1%
increments. For 1% increments, hold down the Video button.
16.0 Video Legalizer
These parameters allow adjustment of signal levels to meet legal broadcast
requirements. When set to Off, the Video Legalizer is not enabled, and the
following clip controls are not active. In YUV mode, the White Clip, Black Clip,
and Chroma Clip controls are enabled and clip any luma/chroma that exceed the
set limits. In RGB mode only the White Clip and Black Clip controls are active and
limit the R, G, and B values to those settings. RGB mode requires the video to pass
through the RGB Proc Amp to be converted to and from RGB.
Off (default)
YUV
RGB
Disables the Video Legalizer.
Enables the Video Legalizer to clip YUV to legal levels.
Enables the Video Legalizer to clip RGB to legal levels.
16.1 Legalizer White Clip
When the Video Legalizer mode is YUV or RGB, this parameter limits the white
level so that it does not exceed the adjusted limit. Limit can be set from +80 IRE to
+120 IRE.
Variable
Adjusts white clip level from +80 IRE to +120 IRE in 0.5 steps.
Default (unity):
100 IRE
16.2 Legalizer Black Clip
When the Video Legalizer mode is YUV or RGB, this parameter limits the black
level to the adjusted limit. Limit can be set from -10 IRE to +20 IRE,.
Variable
Adjusts black level limit from -10 IRE to +20 IRE in 0.5 steps.
Default (unity): 0 IRE
16.3 Legalizer Chroma Clip
When the Video Legalizer mode is YUV, this parameter limits the maximum
chroma level to the adjusted limit. The limit can be set from +60% to +140%,.
Variable
Adjusts chroma clip level from +60% to +140% in 0.5 steps.
Default (unity): 100 IRE