FS3 Frame Synchronizer/Converter v1.1r1 16 www.aja.com
Function
Knob Action
Take (commit) a change to an edited parameter.
Automatic for most parameters. For multiple field
parameters, push ADJUST momentarily to save.
Abandon (undo) a change before committing.
Push SELECT momentarily.
Take (commit) a special action, such as a preset recall.
Push ADJUST momentarily.
LED Indicators
Indicators on the front panel are multi-state LEDs that light when a condition is
present. The indicators and the conditions that cause them to light are as follows:
REMOTE
A multicolor LED that indicates the current control mode:
• Green = Local Only (front panel control only)
• Red = Remote Only (remote browser or panel control only)
• Amber = Local + Remote (front panel and remote control both enabled)
VID IN (blue)
An active video input signal is detected.
UFC (blue)
The Universal Format Converter has been changed from the default setting.
PROC AMP (blue)
The Proc Amp has been changed from the default setting.
FMT ERR (blue)
The selected input and output formats are incompatible.
REF (blue)
The REF connector has an external reference video source applied.
2SI (blue)
The processor’s output scan format is set to Two Sample Interleave (2SI).
LAN (blue)
The FS3 is connected to an operational local area network. This indicator lights
momentarily when web browser selections are changed.
EXT (blue)
Flashes when a GPI has initiated a change in the system.
PWR 1/2 (blue)
Power Supply 1 or 2 is operational and receiving power. Both PWR 1 and PWR 2
LEDs must be lit to indicate redundant power is available.
ID (blue)
Blinks on and off when you right-click on an FS3 system name and choose
Identify in the web interface Network list. This action helps identify which system