FS3 Frame Synchronizer/Converter v1.1r1 53 www.aja.com
Color Corrector Controls (RGB)
These parameters determine the color correction controls applied to RGB
signals.
13.0 Color Corrector (RGB)
This parameter turns the RGB Color Corrector On and Off. When it is On, you can
set additional parameters to control RGB video Gain, Black Level, and Gamma.
When set to Off, all RGB Color Corrector settings are programmed for unity (or
bypass).
Off (
default
)
On
Sets the RGB Color Corrector to Off.
Sets the RGB Color Corrector to On, enabling the following Color
Corrector parameters.
Source Memory
Independent RGB Color Correct parameter values are kept for each input format.
13.1 Color Red Gain
This parameter adjusts the RGB Red Gain.
Variable
Adjusts Red Gain from zero to 1.5 in 0.01 steps.
Default (unity):
1.0
13.2 Color Red Black Level
This parameter adjusts the RGB Red Black level.
Variable
Adjusts Red Black level from -20 IRE to +20 IRE in 0.5 steps.
Default (unity):
0 IRE
13.3 Color Red Gamma
This parameter adjusts the RGB Red Gamma.
Variable
Adjusts Red Gamma level from -1.0 to +1.0 in 0.01 steps.
Default (unity):
0
13.4 -13.6 Color Green
This set of parameters adjusts the Gain, Black Level, and Gamma for color Green,
same as Color Red described above.
13.7-13.9 Color Blue
This set of parameters adjusts the Gain, Black Level, and Gamma for color Red
Blue, same as Color Red described above.
Custom Conversion Settings
The custom settings determine the image size and shape for Upconvert Mode if
you choose the Custom selection for those modes.
Custom settings are stored separately for each Conversion Mode. Values for each
of the Upconvert Modes and SD Aspect Ratio modes (excluding OFF), plus no
conversion (or HD CrossConvert), are independently stored.