manualshive.com logo in svg

AJA FS3, Installation And Operation Manual, Page: 78 / 108

Share
Download
AJA FS3 Installation And Operation Manual Download Page 78

FS3 Frame Synchronizer/Converter v1.1r1 78 www.aja.com

 

Config Screen

The Config screen includes functions to name the FS3, configure SNMP, hide or 

show unused menus, change the front panel display brightness and fan speed, 

and configure UPnP.

System Name

The System Name parameter sets the name of the FS3 system. To change the 

System Name, click on and drag the cursor across the displayed name, and type in 

a new name. 

Variable

Highlight the existing name and type in a new name, up to 20 

characters. Allowed characters are A-Z, a-z, numerals, hyphen, 

spaces, and period.

SNMP Parameters

The following parameters are used to setup the FS3 SNMP (Simple Network 

Management Protocol) feature. 

•  SNMP Enable
•  SNMP Trap Dest 1
•  SNMP Trap Port 1
•  SNMP Trap Dest 2
•  SNMP Trap Port 2

In addition, the following alarms may affect SNMP messages:

•  Power Supply Alarm
•  Over Temp Alarm 
•  Video Format Alarm
•  Reference Alarm

Refer to 

"Chapter 6 SNMP" on page 86

 for a description of SNMP and how the 

FS3 supports it. 

Summary of Contents for FS3













































































































Reviews:

No comments