manualshive.com logo in svg

AJA FS3, Installation And Operation Manual, Page: 42 / 108

Share
Download
AJA FS3 Installation And Operation Manual Download Page 42

FS3 Frame Synchronizer/Converter v1.1r1 42 www.aja.com

 

and supply, you can suppress the alarm. Changes to this setting are automatically 

saved.

Normal (default)

Suppress

Alarm triggers if either internal power supply experiences a failure or is 

disconnected from mains power.

Alarm will not be triggered by a power supply failure or disconnection 

from power.

6 Video Format Alarm

When set to Normal (default), an alarm is triggered whenever the selected input 

video signal format is incompatible with the selected output format. You can 

suppress the Format Alarm if you wish. The front panel FMT ERR LED lights when 

format errors are detected even if this parameter is set to Suppress. Changes to 

this setting are automatically saved.

Normal (default)

Suppress

Alarm triggers if the format of the selected input video signal is 

incompatible with the selected output format.

Alarm will not be triggered by a format incompatibility.

7 Reference Alarm

This parameter controls how the FS3 responds when the Video Processors 

has a format that is incompatible with the Reference video signal. When set 

to NORMAL, the alarm triggers if the Reference signal is not detected or is 

incompatible with the processor format. You can suppress the Reference alarm is 

you wish. Changes to this setting are automatically saved.

Normal (default)

Suppress

Alarm triggers if the reference signal is not detected or is 

incompatible with the processor format.

Alarm will not be triggered by reference errors.

NOTE:  For proper operation the Input reference signal must be stable and properly 

terminated using a 75-ohm terminator on either the unused loop connector or 

the last piece of downstream equipment to which the Ref Video is connected.

8 Hidden Menus

This parameter lets you choose whether to hide or show inactive menus.

Hide Inactive (default)

Show All

Hides menus that are not in use.

Shows all menus, even those that are not in use.

9 Screen Saver

This parameter lets you choose the menu screen saver.

On (AJA Logo) (default)

Off

System Name

AJA logo screen saver is displayed

The screen saver is not displayed.

Screen saver displays the system name.

10 Display Intensity

This parameter determines the brightness of the alphanumeric display and front 

panel LEDs.

Variable

Dim or brighten the alphanumeric display and activity indicator LEDs 

in steps from 1 (dim) to 8 (brightest). 

Default: 6

Summary of Contents for FS3













































































































Reviews:

No comments