manualshive.com logo in svg

AJA FS3, Installation And Operation Manual, Page: 55 / 108

Share
Download
AJA FS3 Installation And Operation Manual Download Page 55

FS3 Frame Synchronizer/Converter v1.1r1 55 www.aja.com

 

14.7 Custom Top Crop

This parameter changes the Top picture crop position.

100% (default)

+10.0% to +100.0%

Maintains the normal top position of the selected format.

Enables changing the top position.

14.8 Custom Bottom Crop

This parameter changes the bottom picture crop position. 

100% (default)

+10.0% to +100.0%

Maintains the normal bottom position of the selected format.

Enables changing the bottom position.

Region of Interest (ROI) Controls

The Region of Interest parameters select a portion of the input picture that will 

be used for scaling and/or positioning. The selected area can then be scaled to a 

standard pillarbox or letterbox size and shape (On Square), or it can be set to a full 

screen input image (On Full). 

NOTE:  On Full may cause image distortion if it is used to expand an odd-shaped region 

of interest to full screen.

The ROI Setup mode allows you to preview the edges of your selected Region Of 

Interest as you set it up. After selecting the desired region using the Setup Cursor, 

you can take the region to air by setting Region Of Interest to On Square or On 

Full. 
The Setup mode is not required to operate the ROI feature. The edges of the 

Region Of Interest can also be adjusted while in On Square or On Full modes

15.0 Region of Interest (ROI)

This parameter turns the Region of Interest settings On or Off. When enabled, 

the ROI Left, Right, Top, and Bottom controls define the rectangular shape and 

position of the ROI. 

Off 

(default)

Setup

On Square

On Full

Turns off the ROI feature.

Enables ROI cursor.

Enables ROI and sets video to a pillarbox or letterbox shape.

Enables ROI, and expands the ROI area to full screen. 

Interactions occur between ROI settings and other parameters:

•  The Region of Interest menu is not displayed when Active Format Description 

(AFD) is in control of the Conversion Mode.

•  Custom Size and Position settings work interactively with ROI, but Custom 

Crop settings are disabled. Custom Size/Pos is also temporarily disabled while 

in the ROI Setup mode.

15.1 ROI Left

This parameter sets the left boundary of the ROI.

Variable 

(default=100%)

Sets ROI left boundary to 10-100% of full screen in 0.1% increments. For 

1% increments, hold down the Video button.

Summary of Contents for FS3













































































































Reviews:

No comments