manualshive.com logo in svg

AJA FS3, Installation And Operation Manual, Page: 74 / 108

Share
Download
AJA FS3 Installation And Operation Manual Download Page 74

FS3 Frame Synchronizer/Converter v1.1r1 74 www.aja.com

 

Network Pane and Network Configuration Screen

The Network pane on the right side of any screen lists the AJA FS devices that 

appear on the network. This pane includes three additional controls:

•  Hover the cursor over any system name to see its IP address.
•  Right-click any system and select Identify to blink the system ID LEDs. 
•  Click the gear-shaped icon in the Network pane (or select Network from the 

Menu list on the left side of the screen) to open the Network Configuration 

screen listing FS3 network settings. 

The Network Configuration screen allows you to view and change your FS3’s 

network settings and then click Apply to activate them. 
See 

"FS3 Network Setup" on page 22

 for detailed setup instructions for 

connecting the FS3 to a network. Consult your network administrator about how 

to configure network settings. 

IP Address Type

IP Address Type determines the type of TCP/IP network configuration used by the 

FS3. DHCP enables the FS3 to connect to the network DHCP server, which assigns 

the IP Address, Netmask, and Gateway automatically. Static lets you set these 

parameters manually. 

NOTE:  If the IP Address Type is DHCP, the IP Address, Netmask, and Default Gateway 

are gray, indicating they are set automatically and cannot be changed unless 

IP Address Type is first set to Static. Changes are saved and activated upon 

confirmation using the Apply button. 

DHCP (default)

Static Addr

Select automatic IP address assignment from the LAN DHCP server. If 

the FS3 cannot find a DHCP server, it fails over to the static IP address.

Assign a static IP address manually (using parameters 2.2, 2.3, and 2.4). 

The factory default static IP address: 192.168.0.2

Summary of Contents for FS3













































































































Reviews:

No comments