OPTIONAL ACCESSORIES
11-6
SM CKDDCI 2-A.3 GB
11.5 Room
Thermostat
Room Thermostat kit PN: 442298
Thermistor with connector PN: 442296
Before starting the connection verify that the unit is disconnected
from main power supply!!
ROOM THERMOSTAT INSTALLATION INSTRUCTIONS
Check the installation manual for further information
Supplied components list:
No.
Item
QTY
PN
1
Thermostat box
1
442298
2
Shielded cable
1
3
Screws and plugs
2
4
LABEL
1
5
BAG
1
1
Extension cable with
connector
1
442296
Choosing location of installation:
Away from air drafts
Away from direct sun light rays
Average height – 1.5 meters above floor
Away from any heat source
1. Install the thermostat box on the wall according the above location preferences. See figure 1.
2. Connect the shielded cable supplied to the thermostat box into points 3 and 9 (non polarity).
3. Disconnect the existing “RM” sensor from the indoor unit main controller.
4. Connect the other end of “RM” extension cable to the the sheilded cable. Also connect the
grounding fork terminal into the grounding terminal point.
5. In the indoor unit main controller, move the dip switch #2 to OFF position.
Figure 1
