14-2
SERVICING
SM CKDDCI 2-A.3 GB
14.1.3
Removing side panel
1. Remove the top cover as in above
14.1.2.
2. Remove the 2 screws holding the electrical plastic cover and disconnect the power supply
cords.
3. Remove the 9 fixing screws and take out the side panel.
Removing side panel
14.1.4
Removing Air Outlet Grille(s)
Remove the 4 fixing screws of the each grille.
14.1.5
Removing Outdoor Fan
1. Remove the air outlet grille according to
14.1.4
.
2. Remove the hex nut from the motor shaft. To ease the removal, use rubber hammer to hit on the
hex nut while pulling out the fan.
NOTES for re-assemble the fan:
1. Insert the skidding protection part of fan boss in accordance with the cutting part of the motor
shaft. Push hard until fan can no longer be inserted.
2. Fix the screw after with tightening Torque of 8.0 Nm (80kg.cm)
Removing Electrical Cover
