14-11
SERVICING
SM CKDDCI 2-A.3 GB
14.1.17.2
GC 60 DCI
1. Remove the chock coils wires from the chock
terminal block.
2. Remove the terminal block holde.
3. Remove the 2 screws for each chock coil to
release the chock coils from the partition
14.1.17.3 GCD 036 DCR
Remove the chock coil wires from the chock
1.
terminal block.
Remove the 2 screws to release the chock coil
2.
from the partition.
14.1.18 Removing capacitor board
1. Perform the driver module removal procedure
in
14.1.15
from 1 to 4. You may perform #6 as
it will ease the board removal but first release
N and L wires from the line filter.
2. Remove the capacitor wires from the board.
3. Squeeze the 6 spacers head with Long-Nose
Pliers and pull out the board.
Notes to re-assemble the capacitor board:
Capacitors has polarity (+ and -), check to
ensure each terminal before connecting.
Removing capacitor board
Removing Chocks Coils
Removing Chocks Coils
