Aimco iEC, User Manual

Page: 3 / 48

3
SAFETY REQUIREMENTS
READ AND SAVE THESE INSTRUCTIONS
WARNING!
Ensure that owner/operator has read all Safety Requirements and User Manuals prior to operating.
To avoid electric shock, which may result in personal injury and/or death, electrical supply must be
meet the electrical requirements.
Do not operate power tools in explosive atmospheres, such as the presence of flammable
liquids, gases or dust.
To avoid electric shock, which may result in personal injury and/or death, electrical connections
must be properly grounded.
To avoid electric shock, which may result in personal injury and/or death, electrical wiring between
the device, electrical supply and any peripheral equipment must be routed in a secure manner.
Switch device to the “ OFF ” position and disconnect from any power supply prior to servicing. Lock
Out/Tag Out procedures should be followed.
To avoid electric shock, which may result in personal injury and/or death, cords should be kept from
heat, sharp edges, or any other potentially hazardous conditions.
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Keep out of reach of children.
DANGER!
Contact with water, solvents, or other liquid substances may result in personal injury and/or death.
Do not operate equipment under the influence of drugs, alcohol or circumstances in which you are
not fully alert.
Use safety equipment. Always wear eye protection.
Ensure the switch is in the off - position before plugging in.
Remove any adjusting key or wrench before turning the power tool on.
D o not wear loose clothing or jewelry. Keep hair, clothing and gloves away from
moving parts.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool for your application.
Do not use the power tool if the power switch does not turn it on and off.
Safety Information