Aimco iEC, User Manual

Page: 9 / 48

9
Step 2
To scroll through the available display options, press and release the NEXT button. Repeated presses
will cycle the display options as follows
DFLT > ANGL > BCNT > TOT > OK > NOK > CP > CPK > JTRT
The definition of each Display Option is as follows:
DFLT (Default) Field is blank if a Torque Control Strategy is programmed.
For all other strategies the field will display the angle of
rotation from Threshold to Final Torque
ANGL (Angle) If selected, field will display angle of rotation for the previous
rundown, regardless of strategy for the parameter set
BCNT (Batch Count) Field will display the batch count information for the selected
parameter set. Displayed values are current count
(cc) and batch total (bt) , with the information displayed as
cc.bt.
TOT (Total Count) Value shows the total number of rundowns for all
parameter sets from midnight to midnight
OK (OK Count) Value shows the total number of acceptable rundowns for
all parameter sets from midnight to midnight
NOK (NOT OK Count) Value shows the total number of unacceptable rundowns
for all parameter sets from midnight to midnight
CP (Cp Value) Statistical value is Cp for selected parameter set
based on collection of programmed - minimum number of
rundowns. This value is reset upon controller initialization
or new Parameter Set Download or Tool Change
CPK (Cpk Value) Statistical value is Cpk for selected parameter set
based on collection of programmed - minimum number of
rundowns. This value is reset upon controller initialization
or new Parameter Set Download or Tool Change
JTRT (Joint Rate) Displays joint rate of selected Parameter Set based on
previous rundown. The value is displayed in degrees of
rotation from the Joint Rate Threshold ( not Parameter Set
Threshold) to final torque. By default, the Joint Rate Threshold is
10% of target torque
Main Display Functions