Aimco iEC, User Manual

Page: 4 / 48

4
Front Panel
Top Panel
Figure 1
Figure 3
1 —Main Display Panel—Annunciation and Display programming (see Page 5 for detail)
2 — Power Disconnect Switch— Turns controller on and off
3 —Keypad Display Module (KDM)—Onboard Interface for setup and programming (Optional)
Bottom Panel
Figure 2
1 —CAN Connectors— For connection of AEC - CIM communication module and peripheral devices
2 —System Connector (DB - 15 Pin)— For upgrading / changing controller firmware
3 —External transducer Connector (DB - 25 Pin)— Non active, future feature
4 — External I/O Connector (DB - 25 Pin)— Input and output of signals for process control
5 —Power Cord Connection— IPC - 29 Connector
6 —Ethernet Connection Access / Light Tower Board Connection/ Bottom Exit Tool Connection (Optional)
7 —RS232 Connection (DB - 9 Pin)— Serial - data output for communication with peripherals such as bar code
readers
i E C
7
6
5
4
3
2
1
1 —Tool Connector (26 Pin) —Standard connection point for tool cable
2 —Serial data connection for peripherals
3 —Ethernet connection port (2nd connection optional with advanced communication packages)
4 —Serial data connection for peripherals
1
2 3
4