Agilent Technologies 34970A, Service Manual, Page: 5 / 273

The Front-Panel Menus at a Glance
Several of the front-panel keys guide you through menus to configure
various parameters of the instrument (see previous page). The following
steps demonstrate the menu structure using the key.
Tip:
To review the current configuration of a specific menu, press the menu key several times.
A message
NO CHANGES
is displayed when you exit the menu.
4
Press the same menu key again to accept the
change and exit the menu. A brief confirmation
message is displayed.
2
Press the same menu key again to move
to the next item of the menu. Typically,
this is where you choose parameter values
for the selected operation.
3
Rotate the knob to view the choices on this
level of the menu. When you reach the end
of the list, rotate the knob in the opposite
direction to view all of the other choices.
The current selection is highlighted for emphasis.
All other choices are dimmed.
1
Press the menu key. You are automatically
guided to the first level of the menu.
Rotate the knob to view the other choices
on the first level of the menu.
The menu will automatically timeout after
about 20 seconds of inactivity. You will be
returned to the operation in progress prior
to entering the menu.
3