61
EKI-6333AC-4GP User Manual
The
Profile List
shows the settings for the created uplink profiles. The information
includes Profile Name, SSID, Channel, Authentication, Encryption, MAC Address,
Signal Strength, Priority, and Enable.
Figure 3.69 Basic Network > WiFi > Uplink Profile > Profile List
When
Add
button is applied, the
Profile Configuration
screen appears.
Figure 3.70 Basic Network > WiFi > Uplink Profile > Profile Configuration
The following table describes the items in the previous figure.
Item
Description
Profile Name
Enter a profile name for the uplink network specified below. It is a
name that is easy for you to understand.
Value Range: 1 ~ 64 characters.
Network ID (SSID)
Enter the SSID for the VAP, and decide whether to broadcast the
SSID or not.
The SSID is used for identifying from another AP, and client
stations will associate with AP according to SSID. If the broadcast
SSID option is enabled, it means the SSID will be broadcasted,
and the stations can associate with this device by scanning SSID.
Channel
Select a radio channel for the VAP. Each channel is corresponding
to different radio band. The permissible channels depend on the
Regulatory Domain. There are two available options when
Auto
is
selected:
By AP Numbers:
The channel will be selected according to
AP numbers (The less, the better).
By Less Interference:
The channel will be selected
according to interference. (The lower, the better).
Authentication
Specify the authentication method for connecting with the uplink
network. It can be
Open
,
Shared
,
WPA-SPK
, or
WPA2-PSK
.
When
Open
is selected, the pre-shared WEP key could be
set for authentication;
When
Shared
is selected, the pre-shared WEP key should
be set for authentication;
When
WPA-PSK
or
WPA2-PSK
is selected, The the TKIP or
AES pre-shared key should be set for authentication.
