47
EKI-6333AC-4GP User Manual
The
Tag-based VLAN
allows you to customize each LAN port according to VLAN ID.
There is a default rule shows the configuration of all LAN ports and all VAPs. Also, if
your device has a DMZ port, you will see DMZ configuration, too. The router supports
up to a maximum of 128 tag-based VLAN rule sets.
Figure 3.46 Basic Network > LAN & VLAN > VLAN
When
Add
button is applied, the
Tag-based VLAN Configuration
screen appears.
Figure 3.47 Basic Network > LAN & VLAN > VLAN
The following table describes the items in the previous figure.
3.3.2.3
PoE
Power over Ethernet (PoE) describes any of several standardized or ad-hoc systems
which pass electric power along with data on twisted pair Ethernet cabling. This
allows a single cable to provide both data connection and electric power to devices
such as wireless access points, IP cameras, and VoIP phones.
This PoE cellular gateway integrated four-port PoE switch function, and plays as
Power Sourcing Equipment (PSE) role that provides power on the Ethernet cable.
The PoE design is compliant to IEEE802.3af/at standard, The PSE can auto-detect
the type of connected PD (Powered Device) and provide adequate power to it. The
maximum allowed continuous output power per cable is 15.4W for IEEE 802.3af PD
device, and 30W for IEEE802.3at PD device.
However, to make the PoE cellular gateway provide required power through the
Ethernet cables, you have to prepare required PoE power supply and connect it to
the PoE cellular gateway properly, as stated in “Connecting Hardware” on page 8.
The PSE power sourcing capability is up to 120W. If you intend to connect four
802.3at PD devices to the PoE cellular gateway, you have to make sure your PoE
Item
Description
VLAN ID
Define the VLAN ID number, range is 6 ~ 4094.
Internet Access
Click
Enable
checkbox to allow the members in the VLAN group
access to Internet.
Port Members
Check the box(es) to join the VLAN group.
Note:
Only the wireless gateway has the VAP list.
Bridge Interface
Select a bridge interface to these members of this VLAN group. To
create or edit DHCP server for VLAN, refer to
Basic Network
>
LAN & VLAN
>
DHCP Server
.
Save
Click
Save
to save the settings.
Note:
After clicking
Save
button, always click
Apply
button to
apply the settings.
