37
EKI-6333AC-4GP User Manual
Connection Control
There are three connection modes.
Auto-reconnect
enables the router to always keep the
Internet connection on.
Connect-on-demand
enables the router to automatically re-
establish Internet connection as soon as user attempts to
access the Internet. Internet connection will be disconnected
when it has been inactive for a specified idle time.
Connect Manually
allows user to connect to Internet
manually. Internet connection will be inactive after it has been
inactive for specified idle time.
MTU Setup
Check
Enable
checkbox to enable the MTU (Maximum
Transmission Unit) limit, and specify the MTU for the 3G/4G
connection.
MTU refers to Maximum Transmission Unit. It specifies the largest
packet size permitted for Internet transmission.
Value Range: 1200 ~ 1500.
Service Port
Enter the service port that the Internet service. There are three
options can be selected:
Auto:
Port will be automatically assigned.
1701 (For Cisco):
Set service port to port 1701 to connect to
CISCO server.
User-defined:
enter a service port provided by your service
provider.
MPPE
Check
Enable
checkbox enable MPPE (Microsoft Point-to-Point
Encryption) security for PPTP connection.
NAT
Enable NAT to apply NAT on the WAN connection. Uncheck the
box to disable NAT function.
IGMP
Enable IGMP (Internet Group Management Protocol) would enable
the router to listen to IGMP packets to discover which interfaces
are connected to which device. The router uses the interface
information generated by IGMP to reduce bandwidth consumption
in a multi-access network environment to avoid flooding the entire
network.
WAN IP Alias
Enable WAN IP Alias then enter the IP address provided by your
service provider.
WAN IP Alias is used by the device router and is treated as a
second set of WAN IP to provide dual WAN IP address to your
LAN network.
Save
Click
Save
to save the settings.
Undo
Click
Undo
to cancel the settings.
Item
Description
