EKI-6333AC-4GP User Manual
120
3.6.4.2
Diagnostic Tools
To access this page, click
Administration
>
Diagnostic
>
Diagnostic Tools
.
The
Diagnostic Tools
provide some frequently used network connectivity diagnostic
tools (approaches) for the network administrator to check the device connectivity.
Figure 3.172 Administration > Diagnostic > Diagnostic Tools
The following table describes the items in the previous figure.
Save
Click
Save
to save the settings.
Undo
Click
Undo
to cancel the settings.
Item
Description
Item
Description
Ping Test
This allows you to specify an IP/FQDN and the test interface (LAN,
WAN, or Auto), so system will try to ping the specified device to
test whether it is alive after clicking
Ping
button. A test result
window will appear beneath it.
Tracert Test
Trace route (tracert) command is a network diagnostic tool for
displaying the route (path) and measuring transit delays of packets
across an IP network. Trace route proceeds until all (three) sent
packets are lost for more than twice, then the connection is lost
and the route cannot be evaluated.
First, you need to specify an IP/FQDN, the test interface (LAN,
WAN, or Auto) and the protocol (UDP or ICMP), and by default, it
is
UDP
.
Then, system will try to trace the specified host to test whether it is
alive after clicking
Tracert
. A test result window will appear
beneath it.
Wake on LAN
Wake on LAN (WOL) is an Ethernet networking standard that
allows a computer to be turned on or awakened by a network
message. You can specify the MAC address of the computer, in
your LAN network, to be remotely turned on by clicking
Wake up
.
Save
Click
Save
to save the settings.
