Advantech EKI-6333AC-4GP, User Manual

Page: 69 / 143

57 EKI-6333AC-4GP User Manual
3.3.3.2 Wireless Client List
To access this page, click Basic Network > WiFi > Wireless Client List .
The Wireless Client List screen shows the information of wireless clients which are
associated with this device.
Figure 3.65 Basic Network > WiFi > Wireless Client List
The following table describes the items in the previous figure.
Encryption Select a suitable encryption method and enter the required key(s).
The available method in the drop-down menu depends on the
Authentication you selected.

None: It means that the device is open system without
encrypting.

WEP: Up to 4 WEP keys can be set, and you have to select
one as current key. The key type can set to HEX or ASCII . If
HEX is selected, the key should consist of (0 to 9) and (A to
F). If ASCII is selected, the key should consist of ASCII table.

TKIP: TKIP was proposed instead of WEP without upgrading
hardware. Enter a pre-shared key for it. The length of key is
from 8 to 63 characters.

AES: The newest encryption system in WiFi, it also designed
for the fast 802.11n high bitrates schemes. Enter a pre-
shared key for it. The length of key is from 8 to 63 characters.
You are recommended to use
AES encryption instead of any
others for security.

TKIP / AES: TKIP / AES mixed mode. It means that the client
stations can associate with this device via TKIP or AES .
Enter a pre-shared key for it. The length of key is from 8 to 63
characters.
STA Isolation Check Enable checkbox to activate this function. By default, the
box is checked; it means that stations which associated to the
same VAP cannot communicate with each other.
Broadcast SSID Check Enable checkbox to activate this function. If the broadcast
SSID option is enabled, it means the SSID will be broadcasted,
and the stations can associate with this device by scanning SSID.
Enable Check Enable checkbox to activate this VAP.
Save Click Save to save the settings.
Undo Click Undo to cancel the settings.
Item Description
Item Description
Module Select Select the WiFi module to check the information of connected
clients. For those single WiFi module products, this option is
hidden.