Advantech EKI-6333AC-4GP, User Manual

Page: 46 / 143

EKI-6333AC-4GP User Manual 34
When WAN Type is PPPoE , the PPPoE WAN Type Configuration appears.
Figure 3.28 Basic Network > WAN & Uplink > Connection Setup > PPPoE WAN
Type Configuration
The following table describes the items in the previous figure.
Item Description
IP Type Click the drop-down menu to select the IP type, options: IPv4 ,
IPv6 , or IPv4/6 .
PPPoE Account Enter the PPPoE user name provided by your service provider.
PPPoE Password Enter the PPPoE password provided by your service provider.
Primary DNS Enter the IP address of primary DNS server.
Secondary DNS Enter the IP address of secondary DNS server.
Connection Control There are three connection modes.

Auto-reconnect enables the router to always keep the
Internet connection on.

Connect-on-demand enables the router to automatically re-
establish Internet connection as soon as user attempts to
access the Internet. Internet connection will be disconnected
when it has been inactive for a specified idle time.

Connect Manually allows user to connect to Internet
manually. Internet connection will be inactive after it has been
inactive for specified idle time.
Service Name Enter the service name if your ISP requires it.
Assigned IP Address Enter the IP address assigned by your service provider.
MTU Setup Check Enable checkbox to enable the MTU (Maximum
Transmission Unit) limit, and specify the MTU for the 3G/4G
connection.
MTU refers to Maximum Transmission Unit. It specifies the largest
packet size permitted for Internet transmission.
Value Range: 1200 ~ 1500.
NAT Enable NAT to apply NAT on the WAN connection. Uncheck the
box to disable NAT function.
IGMP Enable IGMP (Internet Group Management Protocol) would enable
the router to listen to IGMP packets to discover which interfaces
are connected to which device. The router uses the interface
information generated by IGMP to reduce bandwidth consumption
in a multi-access network environment to avoid flooding the entire
network.
WAN IP Alias Enable WAN IP Alias then enter the IP address provided by your
service provider.
WAN IP Alias is used by the device router and is treated as a
second set of WAN IP to provide dual WAN IP address to your
LAN network.