59
EKI-6333AC-4GP User Manual
Figure 3.67 Basic Network > WiFi > Advanced Configuration > Advanced
Configuration
The following table describes the items in the previous figure.
Item
Description
Regulatory Domain
It limits the available radio channel of this device.
The permissible channels depend on the
Regulatory Domain
.
Beacon Interval
It shows the time interval between each beacon packet
broadcasted. The beacon packet contains
SSID
,
Channel ID
and
Security setting
.
DTIM Interval
A Delivery Traffic Indication Message (DTIM) is a countdown
informing clients of the next window for listening to broadcast
message. When the device has buffered broadcast message for
associated client, it sends the next DTIM with a DTIM value.
RTS Threshold
Request to Send (RTS) Threshold means when the packet size is
over the setting value, then active RTS technique. RTS/CTS is a
collision avoidance technique. It means RTS never activated when
the threshold is set to 2347.
Fragmentation
Wireless frames can be divided into smaller units (fragments) to
improve performance in the presence of RF interference at the
limits of RF coverage.
WMM
WiFi Multimedia (WMM) can help control latency and jitter when
transmitting multimedia content over a wireless connection.
Short GI
Short Guard Interval (GI) is defined to set the sending interval
between each packet. Note that lower Short GI could increase not
only the transition rate but also error rate.
TX Rate
It means the data transition rate. When Best is selected, the device
will select a proper data rate according to signal strength.
RF Bandwidth
The setting of RF bandwidth limits the maximum data rate.
Transmit Power
Normally the wireless transmitter operates at 100% power. By
setting the transmit power to control the WiFi coverage.
5G Band Steering
When the client station associate with 2.4G WiFi, the device will
send the client to 5G WiFi automatically if the client is available on
accessing this 5G WiFi band. This option is only available on the
module that supports 5GHz band.
WIDS
The WIDS (Wireless Intrusion Detection System) will analyze all
packets and make a statistic table in WiFi status. Go to
Status
>
Basic Network
>
WiFi
for detailed WIDS status.
Save
Click
Save
to save the settings.
Undo
Click
Undo
to cancel the settings.
