103
EKI-6333AC-4GP User Manual
The SNMP allows you to custom your trap event receiver. The router supports up to a
maximum of 4 Trap Event Receiver sets.
Figure 3.146 Administration > Configure & Manage > SNMP
When
Add
button is applied, the
Trap Event Receiver Rule Configuration
screen
appears. The default SNMP Version is v1. The configuration screen will provide the
version 1 must filled items.
Figure 3.147 Administration > Configure & Manage > SNMP > Trap Event
Receiver Rule Configuration
The following table describes the items in the previous figure.
Enable
Click
Enable
checkbox to enable this version 3 user.
Save
Click
Save
to save the settings. But it does not apply to SNMP
functions. When you return to the SNMP main page. It will show
“Click on save button to apply your changes” remind user to click
main page
Save
button.
Undo
Click
Undo
to cancel the settings.
Back
Click
Back
to return the previous screen.
Item
Description
Server IP
Specify the trap
Server IP
or
FQDN
. The DUT will send trap to the
server IP/FQDN.
Server Port
Specify the trap server port. You can fill in any port number. But
you must ensure the port number is not to be used.
Value Range: 1 ~ 65535.
SNMP Version
Select the version for the trap
Selected the
v1
: The configuration screen will provide the
version 1 must filled items.
Selected the
v2c
: The configuration screen will provide the
version 2c must filled items.
Selected the
v3
: The configuration screen will provide the
version 3 must filled items.
Community Name
Specify the community name for this version 1 or version v2c trap.
Value Range: 1 ~ 32 characters.
User Name
The function is only available when
SNMP Version
is
v3
. Specify
the user name for this version 3 trap.
Value Range: 1 ~ 32 characters.
Password
The function is only available when
SNMP Version
is
v3
. When
your
Privacy Mode
is
authNoPriv
or
authPriv
, you must specify
the password for this version 3 trap.
Value Range: 8 ~ 64 characters.
Item
Description
