IQ 710 System Manual
© 2002 ADTRAN, Inc.
61202800L1-1B
IQ 710
Section 6, Configuration Guides
Page 250
By default,
AUTO DBU
is disabled. This parameter must be changed to
E
NABLE
for the IQ 710
unit to automatically dial the remote end once any of the DBU Criteria are met. This setting must
also be enabled in order for the IQ unit to automatically answer inbound calls from other units.
3.
Use the right arrow key to select
AUTO DBU
; press
<Enter>
. The screen shown in Figure 4 will
appear.
Figure 4. Auto DBU Selections
4.
Use the down arrow to select
E
NABLE
; then press
<Enter>
. At this point, the
AUTO DBU
parame-
ter will change to
E
NABLE
and the screen shown in Figure 5 will appear.
